sales@grendelsound.com

Products

Installing a speaker into a Dead Room

Installing a speaker into a unloaded Dead Room isolation cabinet is very simple. All that is required is a Phillips screw driver or a cordless drill driver.

Step 1

Remove the four bolts out of the speaker mounting holes.

Step 2

Locate the red and black speaker wire in the cabinet. Connect the terminal of the red wire to the + side of your speaker terminal. Now connect the terminal of the black wire to the - side of your speaker terminal, they just slide right on. Not a big deal if you accidentally plug them in backwards, the phase will just be reversed.

Step 3

Place the speaker in the cabinet and line up the four bolt holes. Insert the bolts and tighten down snuggly.

You're done! Jam it!